Barriers – those structures has been designed to protect people, structure and machines from any damage resulting from fork trucks and transport trucks moving around. See whole PDF brochure with barriers by clicking here.

PROTECTIVE BARRIER R3 HD+
- Application: protective
- Operation: fixed
- Other characteristics: impact-resistant
- Length: 500 mm, 3,000 mm (19.7 in)
- Height: 1,100 mm (43.3 in)
This barrier provides efficient protection from any damage resulting from unwanted actions of fork truck operators. It is best used in an area with low traffic volume. It may be used both indoors and outdoors.
Specification: Material: ERTAX, i-PLAST
Available lenghts: 500 mm – 3000 mm; optional modular conntection
Height: 1100 mm
Fixing method:
• External fixing with M16 anchors
• Internal fixing with an M30 anchor
Application: Designation of transport routes, pedestrian protection, protection of machines and work stations.

PEDESTRIAN BARRIER R2 HD+
- Application: protective, pedestrian
- Operation: fixed
- Other characteristics: modular, impact-resistant
- Length: 500 mm, 3,000 mm (19.7 in)
- Height: 1,100 mm (43.3 in)
This barrier provides efficient protection from any damage resulting from unwanted actions of fork truck operators. It is best used in an area with low traffic volume. It may be used both indoors and outdoors.
Specification:
Materal: ERTAX, i-PLAST
Available lenghts: 500 mm – 3000 mm; optional modular connection
Height: 1100 mm
Fixing method:
• External fixing with M16 anchor
• Internal fixing with M30 anchor
Application:
Designation of transport routes, pedestrian protection, protection of work stations.

PEDESTRIAN BARRIER PEDESTRIAN HD+
- Application: pedestrian
- Operation: fixed
- Other characteristics: modular
- Length: 500 mm, 2,000 mm (19.7 in)
- Height: 1,100 mm (43.3 in)
These barriers, based on fully modular system, designate safe transport routes, preventing from involuntary intrusion of a pedestrian to a transport route. This structure is perfect for any area with potential collision risk. This barrier is made of i-PLAST and ERTAX, and therefore displays extreme durability and flexibility.
Specification:
Material: ERTAX, i-PLAST
Available lenghts: 500 mm – 2000 mm; optional modular connection
Height: 1100 mm
Fixing methods:
• External fixing with M16 anchors
Application:
Designation of passageways, pedestrian protection.

PROTECTIVE BARRIER DB HD+
- Application: protective
- Operation: fixed
- Other characteristics: modular
- Length: 600 mm, 2,500 mm (23.6 in)
- Height: 690 mm (27.2 in)
DB HD+ Barrier is an ideal solution for protection of machines and racks. Its entire system displays extreme durability and resistance, due to use of i-PLAST and ERTAX. It efficiently absorbs any impact and protects its structure and fixing. DB HD+ complies with the HACCP standards, this enabling it to be applied in food and pharmaceutical industries.
Specification:
Material: i-PLAST, ERTAX
Available lenghts: 600 mm – 2500 mm, optional modular connection
Height: 690 mm
Fixing method:
• External fixing with M20 anchors
• Internal fixing with an M30 anchor
Application: Protection of walls and racks.

PROTECTIVE BARRIER GB HD+
- Application: protective
- Operation: fixed
- Length: Max.: 6,000 mm (236.2 in)
Min.: 500 mm (19.7 in) - Height:
Max.: 230 mm (9.1 in)
Min.: 130 mm (5.1 in)
VO HD+ Barrier is a low-height barrier for protection of walls and storage racks. By use of polymer plastics, i-PLAST and ERTAX, it is extremely resistant to shocks, yet highly flexible. This product is often combined with Wall Protector HD+, BauC HD+ or BauC2 HD+ products, in any place where protection devices with different heights are needed. In such configurations, VO HD+ provides additional improvement of a structure, absorbing additional impact and improving barrier durability. Available in yellow or black, with optional use of reflective elements.
Specification:
Material: i-Plast, ERTAX
Available lenght: 500 mm – 6000 mm
Height: 130 mm – 230 mm
Diameter: 100/125/140/160/200 mm
Fixing method:
• Internal fixing with M20 or M30 anchor
Application: Protection of machines, buildings, storage racks, storage areas.

PROTECTIVE BARRIER GB HD+ HIGH
- Application: protective
- Operation: fixed
- Length:
Min.: 1,000 mm (39.4 in)
Max.: 2,500 mm (98.4 in) - Height: 500 mm (19.7 in)
VO HD+ High Barrier has much improved durability over its classic version. It is made of ERTAX, highly resistant to multiple damage. It is perfect for protection of machines, walls and racks. This high variant of VO HD+ is particularly applicable in food industry as it is exceptionally easy to clean, due to its height.
Specification:
Material: ERTAX
Available lenghts: 1000 mm – 2500 mm
Height: 500 mm
Fixing method:
• Internal fixing with M30 anchor
Application:
Protection of walls, racks, machines.

PROTECTIVE BARRIER VO HD+ DOUBLE
- Application: protective
- Operation: fixed
- Length:
Min.: 500 mm (19.7 in)
Max.: 6,000 mm (236.2 in) - Height: 600 mm (23.6 in)
VO HD+ Double Barrier is perfect as a means of fencing off transport routes both indoors and outdoors. It is made of two profiles. The barrier may be connected by modules, thus tailoring it to a customer’s needs. Available in yellow or black.
Specification:
Materiał: i-PLAST, ERTAX, steel
Available lenghts: 500 mm – 6000 mm
Height: 650 mm
Diameter: 140/160/200mm
Fixing methods:
• External fixing with M16 anchors
Application:
Protection of walls, racks, machines, transport routes.

PROTECTIVE BARRIER RE HD+
- Application: protective
- Operation: fixed
- Other characteristics: modular
- Length:
Min.: 500 mm (19.7 in)
Max.: 3,000 mm (118.1 in) - Height:
Min.: 400 mm (15.7 in)
Max.: 600 mm (23.6 in)
This barrier has been designed to protect the most sensitive parts of storage racks and machines. It is perfect for any points exposed to potential damage inflicted by fork trucks and transport trucks. Thus, it is the most efficient rack face protection. It may also be used in freezers and coolers. It complies with rigorous HACCP standards. The barrier absorbs very powerful shocks, protecting floor from damage.
Specification:
Material: i-PLAST, ERTAX
Available lenghts: 500 mm – 3000 mm; optional modular connection
Height: 400 mm – 600 mm
Fixing method:
• External fixing with M16 anchors
• Internal fixing with M30 anchor
Application:
Protection of storage racks, machines, gates.

ACCESS BARRIER RT HD+
- Application: access
- Operation: portable
- Length:
Min.: 1,000 mm (39.4 in)
Max.: 3,000 mm (118.1 in) - Height:
Min.: 400 mm (15.7 in)
Max.: 1,000 mm (39.4 in)
BISF HD+ Removable Barrier is a perfect solution to protect machines, electric cabinets or other places vulnerable to damage while allowing
for easy access in case of e.g. maintenance. The structure is made of one or two or more removable profiles being inserted in protection
posts.
Specification:
Material: i-PLAST, Ertax
Available height: 400 mm – 1000 mm
Module lenght: 1000 mm – 3000 mm
Fixing:
• External fixing with M16 anchors
• Internal fixing with an M30 anchor
Application:
Protection of machinery, electric cabinets, belt conveyors and roller conveyors.

SQUARE COLUMN PROTECTOR RAL2, RAL3
- Type: square
This structure has been designed to provide integrated protection for columns and posts at any height. This product is being perfectly adapted to any element it protects. It is perfect for any place where protection installation opportunities are limited. The product actively protects any structure from abrasion and impacts, dissipating the shock energy on the entire area of the stopper. Aside from i-PLAST and ERTAX, it is also made of PE foam, adding shock absorbance performance. Optional application of reflective elements.
Specification:
Material: i-PLAST,ERTAX
Height: 500 mm – 3000 mm
Lenght: 400 mm – 2000 mm
Application:
Protection of posts and columns.

PROTECTIVE BARRIER SO HD+
- Application: protective
- Operation: fixed
- Length:
Min.: 1,000 mm (39.4 in)
Max.: 6,000 mm (236.2 in)
A structure made of i-PLAST. It has been designed to protect upper components of doors, gates and other passages to prevent any involuntary
damage by vehicles passing through. It absorbs large shock energy, avoiding any damage in its structure or fixing parts. This product may be customised for any customer.
Specifiaction:
Material: i-PLAST
Available lenght: 1000 mm – 6000 mm
Diameter: 90/110/125/140 /160/200 mm
Fixing methods:
• Fixing depends on the installation location
Application:
(Un)loading docks, doors, gates, upper attachment protection, machinery protection.

PARKING BARRIER DE HD+
- Application: parking
- Operation: fixed
- Other characteristics: modular, plastic
- Length:
Min.: 500 mm (19.7 in)
Max.: 3,000 mm (118.1 in) - Height: 40 mm, 60 mm, 80 mm (1.6 in)
DE Floor Barrier is an efficient solution for fencing off transport routes and storage areas. This structure is a specific entrance limit. It protects
manufacture and storage zones from a fork truck or a transport truck involuntarily crossing outside its designated area. The structure is made
of ERTAX, a plastic resistant to deformation and low temperature. Thus, it fulfils its role both indoors and outdoors.
Specification:
Material: ERTAX
Available lenghts: 500 mm – 3000 mm; optional modular connection
Height: 40/60/80 mm
Fixing method:
• External fixing M16
Application:
Fencing off manufacture and storage areas, protection of racks and walls, securing (un)loading ramps, designation of transport routes.

PROTECTIVE BARRIER
- Application: protective, pedestrian
- Operation: fixed
- Other characteristics: modular, impact-resistant
- Length:
Min.: 1,000 mm (39.4 in)
Max.: 2,500 mm (98.4 in) - Height:
Min.: 900 mm (35.4 in)
Max.: 6,000 mm (236.2 in)
A shock-resistant structure for protection of pedestriansin any place where storage and reloading of goods may prove hazardous for people.
It is specifically adequate for places where it is difficult to fence off safe passageways for pedestrians. This modular barrier system may be customised
for any customer, facilitating design and adaptation. Safe Corridor is made of i-Plast and ERTAX, resistant to very powerful shocks.
Specification:
Material: i-PLAST, ERTAX
Available lengths: 1000 – 2500 mm Optional modular connection
Available heights: 900 mm to 2500 mm
Available heights: 2000 mm to 6000 mm
Fixing method:
• External fixing with M20 anchors
• Internal fixing with an M30 anchor

PROTECTIVE BARRIER
- Application: protective
- Operation: fixed
- Other characteristics: modular
- Length:
Min.: 1,000 mm (39.4 in)
Max.: 2,500 mm (98.4 in) - Height:
Min.: 1,500 mm (59.1 in)
Max.: 6,000 mm (236.2 in)
This product has been designed to ensure maximum security to manufacture and storage areas where high stack storage system is used. The barrier provides efficient protection of transport routes, machines and manufacture areas from accidental slip off highstacked goods. Wall Protector ensures perfect protection level at any height. This modular barrier system may be customised for any customer.
Specification:
Material: iPLAST, ERTAX
Available lengths: 1000 – 2500 mm
Optional modular connection
Height: 1500 mm – 6000 mm
Fixing method:
• External fixing with M20 anchors
• Internal fixing witn an M30 anchor
Application:
Protection of machines, walls, buildings, separation of passageways, protection of manufacture areas, separation of high stack storage areas.

ACCESS BARRIER
- Application: access, security
- Operation: fixed
- Other characteristics: modular, for vehicles
- Length:
Max.: 3,000 mm (118.1 in)
Min.: 1,000 mm (39.4 in) - Height:
Max.: 6,000 mm (236.2 in)
Min.: 1,000 mm (39.4 in)
It has been designed to protect manufacture and storage areas. It is a limit stop for fork trucks and transport trucks, providing windows for safe transfer of goods/materials while blocking any truck from entering the pedestrian areas. This barrier may be customised for any customer. It features modular connection system. Mostly used with Wall Protector and DE barriers, facilitating guidance of goods.
Specification:
Material: i-PLAST, Ertax
Height: 1000 mm – 6000 mm
Available lenghts: 1000 mm – 3000 mm;
Fixing method:
• External fixing with M20 anchors
• Internal fixing with M30 anchor
Application:
Separation of manufacture areas from logistic and storage areas, protection of machines, rooms, racks, gates or work stations.

PA HD+ BARRIER
- Application: protective, pedestrian
- Other characteristics: impact-resistant
- Diameter:
Min.: 100 mm (3.93 in)
Max.: 280 mm (11.02 in) - Height:
Min.: 300 mm (11.81 in)
Max.: 2,000 mm (78.74 in)
Structure design to understand protection in particularly vulnerable areas such as entry gates, structural barriers, building facades. PA HD + barriers also block the entry for forklift and transport entrances, while allowing pedestrians to move around in this area. The product is flexible and resistant to multiple impacts. It is equipped with a reflective tape that ensures its good visibility. The product can be used inside and outside the building. Ease of retrofitting the barrier with fencing tapes or other types of fencing.
Specification:
Material: i-PLAST, ERTAX
Available diameters: 100 – 280 mm Optional modular connection
Available heights: 300 mm to 2000 mm
SECURITY GATES

PEDESTRIAN GATE VA
- Type: pedestrian
- Operating mode: manual
- Product applications: industrial
Compatible with HD+ barriers, the VA gate has been designed to provide suitable passageways for pedestrians. This structure is made of three connected profiles. The VA gate is being fixed to HD+ barriers or PA HD+ posts. It is possible to set up one-way or two-way opening, assembly of information signs, warning lighting and locking system.
Specification:
Material: i-PLAST
Height: 500 mm – 2000 mm
Available lenght: 500 mm – 1500 mm
Application:
Access and pedestrian passage is ensured.

SLIDING GATE
- Type: sliding
- Operating mode: manual
- Product applications: industrial
Due to its unique structure, the Slide Gate may be used for permanent or temporary blocking of traffic in a storage site. Its structure has been designed to provide maximum protection for pedestrians and to organise logistic processes in industrial facilities. The product may be equipped with a lock device that allows to close one area while opening another one. This sliding gate is compatible with BauC HD+ and BauC2 HD+ barriers. It is made of i-PLAST and ERTAX, resistant to shocks.
Specification:
Material: i-PLAST, ERTAX
Height: 1000 mm
Lenght: 1000 mm – 3000 mm
Application:
Logistic organisation in industrial facilities, closing one area while opening another one.

PEDESTRIAN GATE
- Type: pedestrian
- Operating mode: manual
- Product applications: for industrial use
- Material: steel
Yellow steel gate with “STOP” sign. Ideally suited to warehouse and production halls where it is necessary to provide a suitable pedestrian crossing point.
The dimensions of the goal can be adjusted to the customer’s needs.
FENDERS & WHEEL-GUIDE

ROUND COLUMN PROTECTOR HD+
- Type: round
The Protector HD+ Stopper Bracket is perfect for protecting storage racks from any damage caused by a fork truck or any other warehouse machinery hitting it, by distributing shock force to its entire area. Using the rack stopper bracket, you minimise the risk of collision that could disturb such rack’s structure or make it fall. This product is made of extremely resistant material, iPLAST, and its interior is filled with polyethylene foam ensuring additional shock absorbance. Protector HD+ complies with the HACCP standards, thus making it applicable for food and pharmaceutical industries. It is also resistant to low temperature, as low as 60° C, allowing it to be used in freezers and coolers. This product is easy to install and requires no floor anchoring. It may be adapted to almost any rack.
Specification:
Material: i-PLAST, pianka polietylenowa
Available height: 300 mm – 1200 mm
Column width: 75 mm – 180 mm
This product is applicable for a surface with temperature down to: 60° C.
Application:
Protection of storage racks.

HIGH-VISIBILITY EDGE PROTECTOR 001052
- Type: high-visibility
Applied in order to protect corners of racks from strokes produced by forklift trucks and other vehicles driving in the area of industrial centers and warehouse halls. It is equipped with practical rolls made from polyamide, which enable moving the pallets without any damages, protecting forklift trucks and racks from effects of a collision.
Material:
High quality steel, galvanized, powder painted.
Specification:
Height: 400 mm
Width: 160 mm
Thickness: 6mm
Rollers on height: 75 mm

WHEEL-GUIDE
The wheel guide rails are made of ERTAX, featuring extreme durability and resistance to shocks. These are used in vehicle manoeuvre areas,
near loading stations, thus allowing drivers to manoeuvre a truck easily to a loading ramp. The rail’s structure ensures the vehicle wheels roll in the right direction. The product maintains its colour, due to unique design.
Specification:
Material: ERTAX
Available lengths: 1000 mm to 4000 mm
Diameter: 160 mm
Application:
Protection of walls and vehices.
GATE PROTECTION

PROTECTIVE BARRIER 009090
- Application: protective
- Operation: fixed
- Other characteristics: plastic
- Length:
Min.: 1,000 mm (39.4 in)
Max.: 6,000 mm (236.2 in) - Height:
Min.: 2,000 mm (78.7 in)
Max.: 6,000 mm (236.2 in)
A structure designed to protect entrance gates from damage caused by fork trucks or transport trucks. A damageresistant system, made of iPLAST and ERTAX, protects the structure from impact, rendering no damage to a fork truck. Gate Protector is also resistant to corrosion, thus applicable for both indoors and outdoors. It is easy to clean. Using Gate Protector allows to reduce gate repair costs, and also prevents from gate downtime (in case of damage).
Specification:
Material: iPLAST, ERTAX
Height: 2000 mm to 6000 mm
Width: 100 mm to 8000 mm
Available lenghts: 1000 mm – 6000 mm
Fixing method:
• External fixing with M20 anchors
• Internal fixing with an M30 anchor
Application:
Protection of gates and entrance ways.

PARKING BUMPER WB HD+
- Options: parking
A structure made of i-PLAST. It has been designed to protect upper components of doors, gates and other passages to prevent any involuntary
damage by vehicles passing through. It absorbs large shock energy, avoiding any damage in its structure or fixing parts. This product may be customised for any customer.
Specifiaction:
Material: i-PLAST
Available lenght: 1000 mm – 6000 mm
Diameter: 90/110/125/140 /160/200 mm
Fixing methods:
• Fixing depends on the installation location
Application:
(Un)loading docks, doors, gates, upper attachment protection, machinery protection.